HP StorageWorks Auto Path VA Software User Manual
Page 18
18
Auto Path VA Devices Window
The Auto Path VA Devices window contains the following items:
•
Server Name. Drop-down menu that lets you select a server.
•
Disk Array. Drop-down menu that lets you select the active array for the window.
•
Devices tab. Opens the Devices window.
•
Adapters tab. Opens the Adapters window. See section ”Auto Path VA Adapters Window” on
page 25 for information.
•
Device#. The total number of devices (LUNs) configured on the selected array.
•
Device Name. The device name.
•
Serial#. The device serial number.
•
State. The state of each device:
–
Active. The device is in use.
–
Failed. The device is no longer in use or all paths to the device have failed.
•
# of Paths. The number of paths to the device which is a multiple of the controllers and host bus
adapters. For example, there are four paths to the device when using two controllers and two host
bus adapters.
•
Load Balance Policy. The load balancing policy currently selected for the device.
•
Device Settings button. Opens the Device Settings window. See section ”Auto Path VA Device
Settings Window” on page 21 for information.