HP StorageWorks Auto Path VA Software User Manual
Page 22
22
Auto Path VA Device Settings Window
The Auto Path VA Device Settings window has the following items:
•
Server Name. The name or IP address of the server.
•
Disk Array Unit. The serial number of the array.
•
Device Serial Number. The serial number of the selected device.
•
Device Name. The name of the selected device.
•
Load Balancing Policy. The load balancing policy for the selected device.
•
Preferred Path Number. The preferred path for the selected device. Shown only when the selected
device does not have a Load Balancing Policy.
•
Path Number. The index number for the path.
•
State. The state of the path:
–
Active. The device is in use.
–
Failed. The device is no longer in use or all paths to the device have failed.
•
Controller Port. The controller’s port number for the device.
•
Port Path Target LUN. The physical path identifier.
•
OK button. Applies the changes, and then displays the Devices window.
•
Cancel button. Cancels the changes and returns to the Devices window.