6 edit zoning dialog tool bar buttons and icons – HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class User Manual

Page 41

Advertising
background image

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide

41

•

Click a zone, zone set, or port icon.

•

Right-click to select a zone set or zone, and open the corresponding popup menu.

•

Hold down the Shift key while clicking several consecutive icons.

•

Hold down the Control key while clicking several non-consecutive icons.

Using tool bar buttons, popup menus, or a drag-and-drop method, you can create and manage zone sets
and zones in the zoning database.

Table 6

describes the zoning tool bar operations.

Use the Edit Zoning dialog to define zoning changes, and click

Apply to open the Error Check dialog.

Click

Error Check to check for zoning conflicts, such as empty zones or zone sets. Click Save Zoning to

implement the changes. Click

Close to close the Error Check dialog. Click Close in the Edit Zoning dialog

to close the Edit Zoning dialog.

Table 6

Edit zoning dialog tool bar buttons and icons

Button/Icon

Description

Create Zone Set button

—

Create a new zone set

Create Zone button

—

Create a new zone

Add Member button

—

Add selected port/device to a zone

Remove Member button

—

Delete the selected zone from a zone set,

or delete the selected port/device from a zone

Copy button

—

Copy selected zoning items to clipboard.

Paste button—Paste clipboard items to selected zoning item where
applicable.

Switch port icon

—

Not logged in

Switch port icon

—

Logged in

NL_Port (loop) device icon

—

Logged in to fabric

NL_Port (loop) device icon

—

Not logged in to fabric

N_Port device icon

—

Logged in to fabric

N_Port device icon

—

Not logged in to fabric

Advertising