HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 76)

76
SNMP properties
Use the SNMP Properties dialog shown in Figure 34 to change SNMP configuration parameters. After
making changes, click the OK button to put the new values into effect. To open the SNMP Properties
dialog, choose one of the following:
•
Select
Switch > SNMP Properties.
• Right-click a switch graphic in the faceplate display, and select SNMP Properties from the popup menu.
Making any changes. Click OK to put the new values into effect.
NOTE:
Since read community, trap community, and write community settings are like passwords and are
write-only fields, the current settings are displayed as asterisks.
Figure 34 SNMP Properties dialog
SNMP properties are divided into the following components:
• SNMP configuration , page 77
• SNMP trap configuration
, page 77