HP Officejet Pro K550 Printer - Manual (Page 84)

Network Configuration Page
1. General Information: Shows information about the current status and connection type of the
network, and other information, such as the URL of the embedded Web server and the hardware
address of the printer.
● Network Status: This setting can be 'Ready' or 'Offline'. When the setting is 'Offline', it
implies either that the IP is being assigned or negotiated by the DNS server, or that the
AutoIP or the network is not available.
● Active Connection Type: Shows the current status of the connection type of the printer and
the network. Shows 'Wired' if the printer is connected to a wired network, and 'Wireless' if the
printer is connected to a wireless network.
2. TCP/IP: Shows information on how the printer is configured, such as the hostname, IP address,
subnet mask, default gateway, server, and service name. Also contains a Config By field, which
shows 'AutoIP' if the printer is connected to a peer-to-peer network, and 'DHCP' if the printer is
assigned an IP address or is configured by a DHCP server.
3. 802.3 Wired/802.11 Wireless: For a wired network, the section name is displayed as '802.3
Wired'; whereas for a wireless network, it is '802.11 Wireless'.
● 802.3 Wired:
▲ iLink Configuration: The possible values are '10T/100T HalfDplx/FullDplx', '10T
HalfDplx', '100T FullDplx', and '100T HalfDplx'.
76 Chapter 6 Configuring and managing the printer ENWW