HP ProLiant DL120 G5 Server - Manual (Page 51)

Troubleshooting 51
Server fault indications flowchart
Symptom: Server boots, but the internal health LED or external health LED is red or amber.
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 Server maintenance and service guide, located on the Support CD or the
HP website (
http://www.hp.com/products/servers/platforms )
2 "Power-on problems flowchart (on page 45 )"
3 "HP Insight Diagnostics (on page 35 )"
4 • "Hardware problems (on page 52 )"
• Server maintenance and service guide, located on the Support CD or
the HP website (
http://www.hp.com/products/servers/platforms )
5 "HP contact information (on page 86 )"