This guide contains detailed information on using the StoreOnce GUI and includes some Command
Line Interface commands and troubleshooting information.

•

Tasks available only in the StoreOnce GUI are described only in this guide.

•

Tasks available in both the GUI and CLI are described in this guide. (The CLI command is
described in greater detail in the HP StoreOnce Backup system CLI Reference Guide.)

•

Tasks only available in the CLI are described fully in the HP StoreOnce Backup system CLI
Reference Guide. Those tasks may not be described in this guide.

Overview of HP StoreOnce Backup products

Table 1 StoreOnce 2700, 4500, 4700, 4900, and VSA models

Storage expansion

Ports

Description

Product model

Not supported

4 x 1GbE ports

A single server with four 2TB
hot-plug disks (iSCSI only)

HP StoreOnce 2700 8TB
Backup, BB877A

One 12–disk expansion
shelf, BB881A

4 x 1GbE ports 2 x 10GbE
ports2 x FC ports

A single server with twelve
2TB hot-plug disks

HP StoreOnce 4500 24TB
Backup, BB878A

Up to seven 12–disk
expansion shelves, BB881A

4 x 1GbE ports 2 x 10GbE
ports4 x FC ports

A head server unit with two
1TB disks and a

HP StoreOnce 4700 24TB
Backup, BB879A

pre-configured storage array
with twelve 2TB disks

Up to five 11–disk
expansion kits for the first

4 x 1GbE ports 4 x 10GbE
ports4 x FC ports

A head server unit with two
1TB disks and a

HP StoreOnce 4900 48TB
Backup, BB903A

disk enclosure, BB908AOne

pre-configured two-drawer

additional disk enclosure

disk enclosure with eleven

with 11+4 spare

4TB disks and four hot spare
disks

pre-configured storage,
BB904A, with up to a further
five 11–disk expansion kits,
BB908A

Getting started

Advertising