HP StoreOnce Backup - Manual (Page 96)

To edit StoreOnce Catalyst blackout windows (administrators only)
1. Select the Blackout Windows tab.
2. Click Edit.
3. Check the box next to the required day of the week.
4. The time boxes become editable. Use the spinner menus to select the appropriate hours.
5. Set up as many blackout windows, as required.
6. Make sure the Apply First Time Restriction box is checked. This ensures the times that have
been specified are enabled. If it is not checked, the times are ignored.
7. To enable a second blackout window, make sure the Apply Second Time Restriction box is
checked. The second blackout window for each day must occur after the first blackout window
for that day.
8. Click Apply.
To pause copy jobs (administrators only)
The Pause Copy Jobs button on the Blackout Windows tab places all outbound copy jobs on hold
immediately. Click Pause Copy Jobs a second time to resume outbound copy jobs.
StoreOnce Catalyst Bandwidth Limiting Windows tab
There are four sections to this tab, all of which relate to bandwidth limiting on outbound copy jobs.
•
Status: details the current bandwidth limit, if any.
•
General bandwidth limit: administrator users may enable and apply a general bandwidth
limit. This is a simple calculation of:
(Max WAN Speed) x (Max Desired WAN Usage%).
•
Bandwidth limit calculator: provided to help work out limit values for the general bandwidth
limit and the bandwidth limiting windows.
•
Bandwidth limiting windows: administrator users may specify certain times when different
bandwidth limits may apply. Any bandwidth limit entered will overwrite the general bandwidth
limit.
Bandwidth limiting can be used to avoid saturating the WAN to free up bandwidth for other
processes and applications. A minimum of 2Mbps per concurrent job is recommended. At least
512Kbps per concurrent job is required for reliable operation. These limits apply to all outbound
copy jobs from this local appliance.
96 HP StoreOnce Catalyst functions