Configuring hp sim to receive traps, Configuring the management module to, Send traps to hp sim – HP Modular Cooling System Options User Manual
Page 47
Systems Insight Manager integration 47
#-------------------------------------------------------
#Additional Web Server Discover Properties
#-------------------------------------------------------
#NOTE: See "AdditionalWsDisc_README.txt" for a description of entries in this
file and how to add or remove additional web server ports for discovery and
identification.
#-------------------------------------------------------
The following are actual web server ports enabled by default.
#To remove them from the discovery process, comment out the line with a '#' or
remove it. You will need to restart the HP SIM service for the changes to take
effect. In addition, you will need to run the Device Identification task to find
any new ports that were defined.
#-------------------------------------------------------
#411=Director Agent,,true,false,,http
#3201=Compaq TaskSmart,,true,false,,https
#8008=Default Home Page,,true,false,,http
#1311=Server Administrator,,true,false,,https
#1234=HP Modular Cooling System,,true,false,,https
The last entry allows System Insight Manager to detect management module installations that are running on
port 1234 and using HTTPS.
Configuring HP SIM to receive traps
Before HP SIM can receive traps, the correct MIB file (cpqwcrm.mib) must be compiled into HP SIM.
To register the MIB:
1.
Copy the .MIB file from the MCS documentation CD MIBs folder to the HP\Systems Insight
Manager\mibs folder.
2.
From the HP\Systems Insight Manager\mibs folder, run mcompile cpqwcrm.mib from the command
line to compile the new .MIB file. A new file named cpqwcrm.cfg is created.
3.
Register the new .MIB file by entering mxmib -a cpqwcrm.cfg from the HP\Systems Insight
Manager\mibs command line.
4.
Enter HP\Systems Insight Manager\mibs>mxmib at the command line, and verify that the new
.MIB file is listed.
NOTE:
For more information on uploading and registering a MIB in HP SIM, refer to the HP
Systems Insight Manager Technical Reference Guide located on the HP Management CD.
Configuring the management module to send traps to
HP SIM
1.
Add the HP SIM server as an SNMP trap recipient on the Trap Receivers tab (on page
2.
Configure the management module to send alert notifications to HP SIM.