HP 3PAR System Reporter Software - Manual (Page 123)

Table 58 Metric (continued)
Data Tables Description metrics
statpd_ssd150, statpd_sum, statpd_nl7sum,
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Write KBytes/sec write_kbps
statpd_ssd150, statpd_sum,
statpd_nl7sum,statpd_fc10sum,
statpd_fc15sum,statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Total (read + write) KBytes/sec total_kbps
statpd_ssd150, statpd_sum, statpd_nl7sum,
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Read service time in millisec averaged
over the sample read_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Write service time in millisec write_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total (read + write) service time in millisec total_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Read IO Size in KBytes read_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Write IO Size in KBytes write_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total (read + write) IO Size in KBytes total_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total queue length total_qlen
statcpu Percentage idle time for the node idle_perc
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun Total utilization per second. For instance,
when the PD utilization exceeds a given total_utilperc
high (say 90%) utilization meaning that
90% of the time there is some IO
operation outstanding at the PD.
statqos Read wait time in millisec averaged over
the sample read_waittms
statqos Write wait time in millisec averaged over
the sample time write_waittms
statqos Total wait time in millisec averaged over
the sample time total_waittms
statqos IO rejection io_rej
statqos Bandwidth rejection in KiB bw_rejKiB
statqos no. of IOs delayed by the QoS rule d_qlen
Direction
Specifies whether the Metric should be less than (<) or greater than (>) the Limit Value for the alert
to be generated.
Configuring Rules for Email Alerts 123