HP 8.20q Fibre Channel Switch - Manual (Page 59)

HP StorageWorks Simple SAN Connection Manager user guide 59
8. In the Password to change the server’s HBA configuration dialog box ( Figure 38 ), enter the password,
and then click OK. The same password applies for all the HBAs in the server. If more than one server is
in the list, you must enter the password for each server.
Figure 40 Password to change the server’s HBA configuration dialog box
The HBA Driver Update wizard ( Figure 41 ) should now show all columns completed.
Figure 41 HBA Driver Update wizard
9. Click Next.
10. To complete the HBA Driver Update wizard, choose one of the following options:
• To confirm and proceed with the driver update, click Finish.
• To change your selections for the driver update, click Back.
• To stop the driver update, click Cancel.
If you clicked Finish, a message box states the HBAs are ready to be updated. The update takes a while
and cannot be canceled.
11. Click Yes when prompted to update the HBAs.