Creating an alias for a logical disk, 57 delete logical disk dialog box – HP 8.20q Fibre Channel Switch User Manual
Page 75
HP StorageWorks Simple SAN Connection Manager user guide
75
To delete a logical disk:
1.
On the Logical Disk Operations menu, click Delete Logical Disk.
The Delete Logical Disk dialog box (
) opens.
Figure 57
Delete Logical Disk dialog box
2.
From the Logical Disk List, select the check box next to the logical disk(s) you want to delete. (To delete
all logical disks, select the Select All check box.)
NOTE:
For HP MSA subsystems, you can only delete the logical disk at the bottom of the list.
3.
Click Delete Logical Disk.
4.
To confirm the deletion, click Yes.
5.
Repeat steps 2 through 4 to delete additional logical disks.
6.
When you are finished deleting logical disks, click Close.
Creating an alias for a logical disk
You can create alias (user-friendly) names for logical disks (LUNs) to help you easily identify them in Simple
SAN Connection Manager.
To create an alias for a logical disk:
1.
On the LUN Assignment map, right-click a logical disk (LUN) icon, and then on the shortcut menu, click
Create Alias for Logical Disk.