HP ProLiant ML115 Server - Manual (Page 14)

10 MediaShield User’s Guide – Version 1.0
C HAPTER 2
Configuring the BIOS
4 From the RAID Config window, globally enable RAID, then enable the SATA ports
with disks that you want to use for RAID.
If RAID is enabled globally but not enabled on the individual SATA port, disks on that
port can only be used for non‐RAID applications.
In the example in RAID Config Window , four SATA ports are enabled, so the non‐
bootable RAID array can include up to four SATA disks. If there is a disk connected to
ʺSATA 3 Primary” or “SATA 3 Secondaryʺ, it cannot be used for RAID.
5 Press F10 to save the configuration and exit.
The PC reboots.