Creating a non-bootable array, Step 1: enable raid in the system bios, Step 2: create the raid array – HP ProLiant ML115 Server User Manual
Page 25: Using the raid bios, Creating a non‐bootable array
NVIDIA Corporation
21
C
HAPTER
3
Creating RAID Arrays
Creating a Non-Bootable Array
Step 1: Enable RAID in the system BIOS
See
“Enabling RAID in the System BIOS” on page 8
Step 2: Create the RAID Array
There are two methods you can use to create a RAID array:
Using the RAID BIOS
“Creating a RAID Array Using the RAID BIOS” on page 11
.
2 Install the NVIDIA RAID drivers
The \rpm folder contains the RAID driver packages for various Linux distributions.
Choose the rpm package corresponding to whether your Linux platform is 32‐bit or 64‐
bit, and install as follows:
rpm -ivh NvRaid-Drv-XXX.rpm
where XXX specifies either 32‐bit or 64‐bit.
3 Install the NVIDIA MediaShield application.
Choose the rpm package corresponding to whether your Linux platform is 32‐bit or 64‐
bit, and install as follows:
rpm -ivh NvRaid-UI-xxx.XXX.rpm
where XXX specifies either 32‐bit or 64‐bit.