HP XP Continuous Access Software - Manual (Page 134)

134 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
paircreate
Create a pair relationship
Description
The paircreate command establishes a primary to secondary pair
relationship between volumes. This command generates a new paired
volume from SMPL volumes. The default action pairs a logical group of
volumes as defined in the RM instance configuration file.
HP-UX
Caution
Before issuing this command, ensure that the secondary volume is not
mounted on any HP-UX system. If the secondary volume is mounted during
the paircreate command, change the pair status to SMPL, unmount the
secondary volume, and reissue the paircreate command.
MPE/iX
Caution
Before issuing this command, ensure that the secondary volume is not
mounted on any MPE/iX system. If it is, VSCLOSE that volume set and
de-configure the LDEVs using IOCONFIG, the online device configuration
utility program.
Syntax
paircreate { –nomsg | –g group | –h | –d pair_vol | –d[g] raw_device
[ MU# ] | –d[g] seq# LDEV [ MU# ] | –q | –vr | –vl | –f fence [CTGID] |
–m
mode | –c size | –nocopy | –split | –z | –zx | –jp ID | –js ID |
-pid <PID>}
Arguments
–c size Specifies the number of tracks that are concurrently
copied. The number can range from 1 to 15. The default
value of 3 is used if this argument is not specified.
–d pair_vol Specifies a paired volume name written in the
configuration definition file. The command executes
only for the specified paired volume.
–d [g] raw_device [ MU# ]