HP XP Continuous Access Software - Manual (Page 215)

215
drivescan
Display disk drive and connection information Windows NT/2000/2003 only
Description
The drivescan command displays the relationship between hard disk
numbers on Windows NT/2000/2003 and the actual physical drives.
Syntax
RM_command –x drivescan stringx ,y
Arguments
RM_command Any general RM command.
string Any alphabetic character string; provided for
readability.
x ,y Specifies a range of disk drive numbers.
Output Fields
harddisk n The hard disk number.
Port The port number on the device adapter.
PhId The BUS number in the device adapter port.
TId The target ID of the hard disk that connects to the
device adapter port. For information about Fibre
Channel address conversion, see Appendix ,
“Fibre
Channel addressing” .
LUN The logical unit number of the hard disk that connects
to the device adapter port. This item shows the LDEV#
of the LUN that completes a pair.