HP XP Continuous Access Software - Manual (Page 220)

220 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
mount
Mount and display a device Windows NT/2000/2003 only
Description
The mount command allocates the specified logical drive letter to the
specified partition on the disk drive (hard disk). If no arguments are
specified, this option displays a list of mounted devices.
Syntax
RM_command –x mount
Windows NT:
RM_command –x mount D: hdisk# [partition# ] . . .
Windows 2000/2003:
RM_command –x mount D: volume#
RM_command –x mount D: [\directory] volume#]
Arguments
RM_command Any general RM command.
D Specifies the logical drive letter.
hdisk# (Windows NT only) The disk drive (hard disk) number
to be mounted.
partition# (Windows NT only) The partition number within the
drive.
directory (Windows 2000/2003 only) The directory mount point
on the logical drive.
volume# (Windows NT only) The volume name and number to be
mounted.
(Windows 2000/2003 only) Volume# must be specified
in LDM format: '\Vol# or \Dms# or \Dmt# or \Dmr# '
Restrictions
The partition on the specified disk drive (hard disk) must be recognized on
Windows NT/2000/2003.