HP XP Continuous Access Software - Manual (Page 97)

Using RAID Manager 97
You can redirect the output of the batch file by adding redirection in the
batch file. Alternately, you can specify redirection in the Scheduled Task
item’s Run field in advanced properties (for example,
C:\HORCM\add_RM_user.bat > C:\HORCM\logs\add_RM_user.log).
Note : If you change the Windows system administrator’s password, this
scheduled task will not execute. You will need to modify the task by
entering the new password.
When new Device Objects (physical drives) are created, you must update
user access for these devices.
RAID Manager user
Establishing the HORCM (/etc/horcmgr) startup environment
By default, the RM configuration definition file is stored in the
“%SystemDrive%\windows” or “%SystemDrive%\WINNT” directory. A
user with no system administrator privilege is denied writing to these
directories. Therefore, the RM user needs to have his or her configuration
file in some other directory and set the HORCM_CONF variable to that
location.
Example 1 C:\HORCM\etc\>set HORCM_CONF=C:\Documents and
Settings\RMadmin\horcm10.conf
C:\HORCM\etc\>set HORCMINST=10
C:\HORCM\etc\>horcmstart
horcmstart must be executed without arguments.