HP XP P9500 Storage - Manual (Page 146)

Figure 3-5 Result of Executing vgdisplay -v (When There Are Two Physical
Volumes)
Check the shaded portion and confirm that vg02 consists of /dev/sde and /
dev/sdu, both of which have been defined for the same device to be
managed by HDLM.
Setting in the syslogd Settings File
The log upon executing the installation is output to syslog. In Red Hat
Enterprise Linux, check the syslogd settings file (system log configuration
definition file) and make sure that it specifies that messages with an Error
level or higher are to be output.
Figure 3-6 Example of the Contents of the syslogd Settings File (In Red Hat
Enterprise Linux) on page 3-79 shows an example of the contents of the
syslogd settings file.
3-78
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))