HP XP P9500 Storage - Manual (Page 235)

Figure 3-28 Device configuration When Creating a Logical Volume on an
HDLM Device
To create a new logical volume on an HDLM device:
1
.
Stop all processes and services that are using the HDLM device.
2
.
Create a disk partition on the HDLM device and change the system ID
from Linux (83 in hexadecimal representation) to Linux LVM (8e in
hexadecimal representation).
The following shows an example of how to create two partitions in /dev/
sddlmad (HDLM device):
Example of executing the fdisk command (IA32):
Creating an HDLM Environment
3-167
Hitachi Dynamic Link Manager User Guide (for Linux(R))