HP XP P9500 Storage - Manual (Page 164)

# vgchange -ay vg01
vgchange -- volume group "vg01" successfully activated
20
.
Mount the logical volume that was moved.
In the following example, the logical volume is /dev/vg01/lvol1 and the
command mounts the volume on /mnt/lvol1:
# mount /dev/vg01/lvol1 /mnt/lvol1
21
.
Specify the settings required for using virtual environments.
If you are using Xen, set up Xen to use HDLM devices in domainU. If you
are using KVM, register HDLM devices into the hardware configuration
file. For details on operating environments for the virtual environments
supported by HDLM, see Virtual Environments Supported by HDLM on
page 3-67 . For details on how to set up a virtual environment, see
Settings for Xen on page 3-175 or Settings for KVM on page 3-177 .
22
.
Specify the settings required for operations in a cluster configuration.
For a cluster configuration, change the logical device file names of SCSI
devices specified in the cluster to logical device file names of HDLM
devices.
For details on setting the cluster software, see
Settings for Heartbeat on
page 3-178 , Settings for Oracle RAC on page 3-178 , Settings for the
RHCM on page 3-181 3.15, or Settings for VCS on page 3-183 .
Unattended Installation of HDLM
When you perform a new installation, re-installation, or upgrade installation
of HDLM, you can choose an unattended installation. An unattended
installation enables a user to install HDLM without entering information.
The procedure for performing an unattended installation of HDLM is described
below. Note that preparations before installing HDLM are required. For details
about the preparations before performing a new installation of HDLM, see
Preparations for a New Installation of HDLM on page 3-75 . For details about
the preparations before performing a re-installation or an upgrade installation
of HDLM, see Preparations for an Upgrade Installation or Re-installation of
HDLM on page 3-84 .
1
.
Log on to Linux as the root user.
2
.
In the following cases, prepare the license key or the license key file:
¢
If you are installing HDLM for the first time
¢
If you are upgrading or re-installing HDLM after the licensing term has
expired
If the directory that contains the license key or the license key file is
specified in the installation information settings file, you can use any
storage directory name and file name. The license key file or license key
is not deleted after the installation.
3-96
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))