HP XP P9500 Storage - Manual (Page 83)

RPM package version depends on the OS version you are using.
Storage Systems Supported by HDLM
The following shows the storage systems that HDLM supports.
Storage Systems
The following storage systems are supported by HDLM:
If an FC-SAN is used:
• Hitachi AMS2000/AMS/WMS/SMS series
• Hitachi NSC55
• Hitachi TagmaStore Universal Storage Platform 100
• Hitachi TagmaStore Universal Storage Platform 600
• Hitachi TagmaStore Universal Storage Platform 1100
• Hitachi Universal Storage Platform V
• Hitachi Universal Storage Platform VM
• Hitachi Virtual Storage Platform
• HP StorageWorks P9500 Disk Array
• HP XP128/HP XP1024/HP XP10000/HP XP12000/HP XP20000/HP XP24000
• Lightning 9900 series
• Lightning 9900V series
• SVS
• Thunder 9500V series
If an IP-SAN is used:
• Hitachi AMS2000 series
Storage systems that are used must have a dual controller configuration. If
you use them in a HUB-connected environment, specify a unique loop ID for
all the connected hosts and storage systems. For details on the microprogram
version required for using HDLM, see HDLM Release Notes. For details on the
settings information for storage system, see the maintenance documentation
for the storage system.
Note:
For details on storage systems applicable to a BladeSymphony
environment or boot disk environment, see the following according to
your OS and version:
¢
Boot Disk Environments and BladeSymphony Environments Supported
by HDLM on page 3-32 in Related Products When Using Red Hat
Enterprise Linux AS4/ES4 on page 3-16
Creating an HDLM Environment
3-15
Hitachi Dynamic Link Manager User Guide (for Linux(R))