HP MSA 1040 SAN Storage User Manual
Hp msa 1040 user guide
Advertising
HP MSA 1040
User Guide
HP Part Number: 762783-001
Published: March 2014
Edition: 1
Abstract
This document describes initial hardware setup for HP MSA 1040 controller enclosures, and is intended for use by storage system
administrators familiar with servers and computer networks, network administration, storage system installation and configuration,
storage area network management, and relevant protocols.
Advertising
Table of contents
Document Outline
- Contents
- Figures
- Tables
- Overview
- Components
- Installing the enclosures
- Connecting hosts
- Connecting to the controller CLI port
- Basic operation
- Troubleshooting
- USB CLI port connection
- Fault isolation methodology
- Stopping I/O
- Diagnostic steps
- Is the enclosure front panel Fault/Service Required LED amber?
- Is the enclosure rear panel FRU OK LED off?
- Is the enclosure rear panel Fault/Service Required LED amber?
- Are both disk drive module LEDs off (Online/Activity and Fault/UID)?
- Is the disk drive module Fault/UID LED blinking amber?
- Is a connected host port Host Link Status LED off?
- Is a connected port Expansion Port Status LED off?
- Is a connected port Network Port Link Status LED off?
- Is the power supply Input Power Source LED off?
- Is the power supply Voltage/Fan Fault/Service Required LED amber?
- Controller failure in a single-controller configuration
- Isolating a host-side connection fault
- Isolating a controller module expansion port connection fault
- Isolating Remote Snap replication faults
- Resolving voltage and temperature warnings
- Support and other resources
- Documentation feedback
- LED descriptions
- Environmental requirements and specifications
- Electrostatic discharge
- Index