Printouts are slanted or skewed, Ink streaks on the back of the paper – HP Deskjet F4480 User Manual

Page 70

Advertising
background image

plan to use immediately. When you have finished printing, return any unused photo
paper to the plastic bag. This will prevent the photo paper from curling.
For more information, see:

“Load media” on page 23

“Paper basics” on page 21

Cause: The wrong kind of paper was loaded in the input tray.

Printouts are slanted or skewed

Try the following solutions if your printout does not appear straight on the page.

Solution 1: Make sure the paper is loaded correctly

Solution 2: Make sure only one type of paper is loaded

Solution 1: Make sure the paper is loaded correctly

Solution: Make sure that the paper is loaded correctly in the input tray.
For more information, see:

“Load media” on page 23

Cause: The paper was not loaded correctly.
If this did not solve the issue, try the next solution.

Solution 2: Make sure only one type of paper is loaded

Solution: Load only one type of paper at a time.
Cause: More than one type of paper was loaded in the input tray.
If this did not solve the issue, try the next solution.

Ink streaks on the back of the paper

Try the following solutions if there is smeared ink on the back of your printout.

Solution 1: Print on a page of plain paper

Solution 2: Wait while the ink dries

Solution 1: Print on a page of plain paper

Solution: Print one or several pages of plain paper to soak up any excess ink in
the product.

To remove excess ink using plain paper

1.

Load several sheets of plain paper in the input tray.

2.

Wait five minutes.

Print quality troubleshooting

67

Solve a problem

Advertising
This manual is related to the following products: