Processor option – HP ProLiant WS460c G6 Workstation-Blade User Manual
Page 31
Hardware options installation 31
2.
Prepare the hard drive.
3.
Install the hard drive.
4.
Determine the status of the drive from the hot-plug SAS hard drive LED combinations ("
" on page
Processor option
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent possible workstation blade malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
CAUTION:
To prevent possible workstation blade overheating, always populate processor
socket 2 with a processor and a heatsink or a processor socket cover and a heatsink blank.
CAUTION:
The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
IMPORTANT:
When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.