The minimum system checks screen appears, A red x appears on the usb connect prompt, Solution 5: load paper in the input tray – HP Deskjet D2680 Printer User Manual
Page 37
Solution 5: Load paper in the input tray
Solution: Load paper in the input tray.
For more information, see:
Cause: The product might have been out of paper.
The Minimum System Checks screen appears
Solution: Click Details to see what the specific problem is, and then correct the
problem before attempting to install the software.
Cause: Your system did not meet the minimum requirements to install the software.
A red X appears on the USB connect prompt
Solution: Verify that the product is set up properly, and then try to re-establish the
connection.
To retry the USB connection
1.
Verify that the USB cable is set up properly as follows:
•
Unplug the USB cable and plug it in again or try plugging the USB cable into
a different USB port.
•
Do not attach the USB cable to a keyboard.
•
Verify that the USB cable is 3 meters (9.8 feet) or less in length.
•
If you have several USB devices attached to your computer, you might want
to unplug the other devices during the installation.
2.
Unplug the product power cord, and then plug it in again.
3.
Verify that the USB cable and power cord are plugged in.
Setup troubleshooting
35
Solve a problem