HP OneView for VMware vCenter - Manual (Page 69)

The following information is displayed for each datastore:
•
Virtual disks—Number of virtual disks on datastores provisioned from the selected host to VMs
•
Total—Amount of storage provisioned on the host as virtual disks (VMDKs or RDMs)
•
Used—Amount of storage used on the host as virtual disks (VMDKs or RDMs)
•
% Savings—Amount of storage saved through the use of VMware thin provisioning
Available HP StoreOnce Backup Systems
This section lists the HP StoreOnce Backup Systems available. For each HP StoreOnce Backup
System, move the cursor over the status bar to view storage information.
For each configured backup system, all the service sets are displayed. For each service set the
following information is displayed:
•
Used—Amount of data stored on the service set by the services on the service set
•
Total—Total amount of storage on the service set
•
Deduplication Ratio—Deduplication ratio of data stored on the service set
Viewing detailed storage information
When you view storage information in HP Management, the Storage page includes another row
of tabs and a filter that you can use to view specific information about storage components, such
as:
•
Summary
•
Storage Volumes
•
Virtual Disks
•
HBAs
•
Paths
•
Replications
•
VMs to Volumes
Viewing storage volumes
The storage volumes page displays the following information:
•
Array Disk Name
HP StoreVirtual—Volume name ◦
◦ HP 3PAR StoreServ—Volume name
◦ HP EVA—Disk path on the storage array
◦ HP MSA—Volume name
◦ HP XP P9000/HP XP—LDKC:CU:LDEV (for example, HP OPEN-V-CVS (00:04:3F))
◦ HP StoreOnce Backup—Not applicable
•
Array Name
HP StoreVirtual—Management group name ◦
◦ HP 3PAR StoreServ—Array display name
◦ HP EVA—Array display name
Using the StoreFront Module for vCenter 69