HP Wi-Fi Direct Mobile Mouse - Manual (Page 24)

Page 24
Wi-Fi Pairing
The HP Wi-Fi Mobile Mouse and your computer communicate using 802.11 wireless technology, no
separate USB receiver is necessary. You must pair (connect) the mouse with your PC to enable the
communication.
Before pairing your mouse to your PC, make sure that your PC’s Wi-Fi is turned on. Many notebook
computers have a switch or button that turns the Wi-Fi function off/on.
To pair (connect) the mouse with your PC for the first time:
1. Install the software included with your mouse. At the end of the installation process, it will lead you
through the steps to pair your mouse with your PC.
To pair (connect) the mouse after the initial software installation:
1. If you have already installed the mouse software, launch the HP Mouse Control Center software from
your desktop shortcut.
2. Click on the Configure icon, and then click on the "Pairing Wizard" button.
3. Move the power switch on the bottom of the mouse to the "on" position.
4. Press and release the "Connect" button on the bottom of the mouse.
5. Follow the steps in the pairing wizard.