Update the firmware, Update the software, Printer maintenance kits – HP Designjet T610 Printer series User Manual
Page 114: On, see
Update the firmware
The printer's various functions are controlled by software that resides in the printer, otherwise known
as firmware.
From time to time firmware updates will be available from Hewlett-Packard. These updates increase the
printer's functionality and enhance its features.
Firmware updates can be downloaded from the Internet and installed in your printer in the following
ways; you can choose whichever you find most convenient.
●
Using HP Easy Printer Care under Windows, select your printer, the Support tab, and then
Firmware Update.
●
Using HP Printer Utility under Mac OS, select Support and then Firmware Update.
●
Using your printer's Embedded Web Server, select the Main tab and then Firmware update.
NOTE:
If you are using an HP Jetdirect print server to connect to a network, the HP Easy Printer Care
and HP Printer Utility options will not be available, so you will need to use the Embedded Web Server.
In each case, follow the instructions on your screen to download the firmware file and store it on your
hard disk. Then select the downloaded file and click Update.
If you experience very slow progress while uploading the firmware file to the printer, the reason could
be that you are using a proxy server. In that case, try bypassing the proxy server and accessing the
Embedded Web Server directly.
●
In Internet Explorer 6 for Windows, go to Tools > Internet Options > Connections > LAN
Settings, and check the Bypass proxy server for local addresses box. Alternatively, for more
precise control, click the Advanced button and add the printer's IP address to the list of exceptions,
for which the proxy server is not used.
●
In Safari for Mac OS, go to Safari > Preferences > Advanced and click the Proxies: Change
Settings button. Add the printer's IP address or its domain name to the list of exceptions, for which
the proxy server is not used.
The firmware includes a set of the most commonly used paper profiles. Extra paper profiles can be
downloaded separately; see
.
Update the software
To update the printer driver and other software for any HP Designjet printer, go to
and select Downloads, then Drivers. Then select your printer, your preferred language,
and your operating system.
If your operating system is Windows, HP Software Update regularly offers to update your software
automatically.
Printer maintenance kits
Four maintenance kits are available for your printer, containing components that may need to be
replaced after long use. When one of them is needed, a message is displayed on the front panel and
by HP Easy Printer Care under Windows or HP Printer Utility under Mac OS.
When you see the message, you should contact HP Support (see
Contact HP Support on page 160
)
and request the maintenance kit. Three of the kits are installed by service engineers only; the fourth
consists of a replacement cutter, which you can install yourself (see
).
104 Chapter 10 Maintaining the printer
ENWW
M
ain
tain
in
g th
e printer