Installing a storage enclosure into the rack – HP ProLiant DL320s Server User Manual
Page 23
Setup 23
•
Phillips screwdriver
•
Hardware options
•
Operating system or application software
•
Keyboard
•
Mouse
•
External USB CD-ROM drive
•
External USB floppy drive
•
USB key
Installing a storage enclosure into the rack
To install the server into the rack:
1.
Secure the front end of the rails to the rack.
IMPORTANT:
Do not remove the pins from the ends of the rack rails unless you are converting
the rails for use in round-hole racks. These load-bearing pins are designed to fit through the
holes without being removed.
IMPORTANT:
Be sure that the scissor-type locking latches engage the rack fully when the pins
extend through the holes marked with the template.
NOTE:
Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal.
2.
Secure the back end of the rails to the rack.
IMPORTANT:
Be sure that the scissor-type locking latches engage the rack fully when the pins
extend through the holes marked with the template.