HP Surestore NAS - Manual (Page 23)

Network Configuration 3-1
3
Network Configuration
This section contains configuration information for the following
network environments:
• Novell NetWare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
• Microsoft & IBM Networks . . . . . . . . . . . . . . . . . . . . page 3-3
• TCP/IP Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-3
Note ❏ To use the CD-ROM server in the TCP/IP environment you
must first set its IP address. This can be done from within
the TCP/IP environment, as described on page 3-3.
Novell NetWare Networks
The HP CD-ROM Server emulates both a NetWare 3.x bindery
server and a NetWare 4.x NDS (Novell Directory Services)
server.
Installation as a
Bindery Server
If used as a Bindery server, no installation is required prior to
using and accessing the HP CD-ROM Server. To access your
CD-ROMs, refer to chapter 4.
Installation as an
NDS Server
If used as an NDS-compatible server, the HP CD-ROM Server
must first be installed in the NDS tree, which simply involves
setting the appropriate configuration parameters.
Note ❏ If this is the first CD-ROM server being installed in your
NDS tree, the CD-ROM Server will try to extend the NDS
Schema with a new attribute to the “NCP server” class. This
new attribute will not affect the operation of your NetWare
servers. This schema extension has been approved by
Novell.
❏ Adding the schema extension requires supervisor rights to
the [Root] of the NDS tree. This means that the user in the
NDSAdminName parameter must have supervisor access
rights.
hp.book Page 1 Thursday, April 2, 1998 4:33 PM