HP Modular Cooling System - Manual (Page 8)

Installation 8
Installation
MCS-200 kit contents
• MCS-200 unit installed on an HP Rack (1)
• Automatic Door Release kit (1)
• Rear plate cover (1)
• Condensation hose (blue) (1)
• Condensation hose (clear)* (1)
• Power cord, 4 m (13.1 ft), L6-20 to Walther Procon series A5 connector (2)
• Power cord, 4 m (13.1 ft), IEC-309 to Walther Procon series A5 connector (2)
• CAT5e cable, 7.62 m (25 ft) (1)
• USB program cable* (1)
• Access panel (1)
• Bracket (2)
• M6 trilobe flathead screw (2)
• M6 flathead screw (2)
*This item might ship preinstalled on the MCS-200 unit rather than in the standard kit contents package.