Overview of this chapter, Right side panel features, Connecting scsi and power cords – HP Optical Jukeboxes User Manual
Page 14: Moving or shipping the jukebox, Setting up:items included, Setting up:items not included, Items included with the jukebox, Power cord, Single-ended and differential scsi terminators, One of each included in a 4- or 6-drive jukebox
1-2
Chapter 1
Setting Up the Jukebox
Overview of This Chapter
Overview of This Chapter
This chapter gives information about the following topics:
•
right side panel features
connecting SCSI and power cords
•
moving or shipping the jukebox
•
connecting SCSI and power cords
What you need to set up the jukebox
Items included with the jukebox:
•
power cord
•
single-ended and differential SCSI terminators
- one of each included in a 4- or 6-drive jukebox
- two of each included in a 10-drive jukebox
- this guide
Items needed but not included with the jukebox:
•
SCSI cable with either a high-density 50-pin (Micro D) or high-density 68-pin
(Micro D) connector depending on whether a single-ended or differential
interface is used
•
single-ended or differential SCSI host adapter with at least one available
address. If you have a 10-drive jukebox you may choose to use two adapters.
•
application software that supports this type of jukebox