Solve wired network problems, Poor physical connection – HP Color LaserJet Pro MFP M177fw User Manual

Page 106

Advertising
background image

Solve wired network problems

Check the following items to verify that the product is communicating with the network. Before beginning,

print a configuration page from the product control panel and locate the product IP address that is listed on

this page.

Poor physical connection

The computer is using the incorrect IP address for the product

The computer is unable to communicate with the product

The product is using incorrect link and duplex settings for the network

New software programs might be causing compatibility problems

The computer or workstation might be set up incorrectly

The product is disabled, or other network settings are incorrect

NOTE:

HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating

systems and not of the HP print drivers. For more information, go to Microsoft at

www.microsoft.com

.

Poor physical connection

1.

Verify that the product is attached to the correct network port using a cable of the correct length.

2.

Verify that cable connections are secure.

3.

Look at the network port connection on the back of the product, and verify that the amber activity light

and the green link-status light are lit.

4.

If the problem continues, try a different cable or port on the hub.

The computer is using the incorrect IP address for the product

1.

Open the printer properties and click the Ports tab. Verify that the current IP address for the product is

selected. The product IP address is listed on the product configuration page.

2.

If you installed the product using the HP standard TCP/IP port, select the box labeled Always print to

this printer, even if its IP address changes.

3.

If you installed the product using a Microsoft standard TCP/IP port, use the hostname instead of the IP

address.

4.

If the IP address is correct, delete the product and then add it again.

The computer is unable to communicate with the product

1.

Test network communication by pinging the network.

96

Chapter 8 Solve problems

ENWW

Advertising