Configure the product, Configure fax time, date, and header, Control panel – HP Color LaserJet Pro MFP M177fw User Manual
Page 53
Configure the product
How you configure the product varies depending on whether you set it up for standalone fax, with an
answering machine, or with an extension phone.
NOTE:
Configuring the fax time, date, and header settings is required to use the fax feature.
●
Configure fax time, date, and header
●
●
Configure for an answering machine
●
Configure for an extension phone
Configure fax time, date, and header
You might have configured these settings when you installed the software. You can configure these settings
at any time by using the product control panel or the HP Fax Setup Wizard.
●
●
Control panel
1.
From the Home screen on the product control panel, select Setup .
2.
Select
Fax Setup
, and then select
Basic Setup
.
3.
Select
Time/Date
.
4.
Select the 12-hour clock or 24-hour clock.
5.
Use the keypad to enter the current time, and then select
OK
.
6.
Select the date format.
7.
Use the keypad to enter the current date, and then select
OK
.
8.
Select
Fax Header
.
9.
Use the keypad to enter your fax number, and then select
OK
.
NOTE:
The maximum number of characters for the fax number is 20.
10.
Use the keypad to enter your company name or header, and then select
OK
.
To enter special characters that are not on the standard keypad, select
@#$
to open a keypad that
contains special characters.
NOTE:
The maximum number of characters for the fax header is 40.
ENWW
Connect and configure the product for fax
43