HP Insight Management-Software - Manual (Page 19)

Figure 7 Enabling firmware updates
A message similar to the following is displayed:
Figure 8 Firmware update message
After the job completes, use the VCSU to perform the firmware update and then proceed to
Step 4 .
4. Check mark the targeted VC Domains on the VC Domain tab and select VC Domain Firmware
Update... again.
NOTE: If another VC Domain with a status other than Firmware update is selected, the VC
Domain Firmware update button is disabled.
5. Select Complete Firmware update to finish the firmware update process ( Figure 9 ).
Figure 9 Completing the Firmware Update process
You may want to upgrade the VC Domain Group firmware after updating the VC firmware. See
“Upgrading VC Domain Group firmware mode” (page 58) for more information.
Updating VC firmware 19