HP Netserver E Server series - Manual (Page 39)

Chapter 5 Troubleshooting
33
Battery System Board
Figure 5-1. Battery on System Board
4. Insert the new battery with the positive sign (+) facing out, and ensure
that it is seated completely. Make sure that the retaining clip is in place,
and holds the battery firmly.
5. Replace the cooling duct/cover and the NetServer cover.
You Can’t Start the Setup Program
This may be due to the copy of the NetServer’s configuration in memory being
corrupted by a program, in which case you will need to erase this bad
configuration. See “Clearing the CMOS Configuration.”