Options dialog box—configuration tab – HP SAN Virtualization Services Platform User Manual
Page 239
2.
Select the Configuration tab. The configuration options appear.
Figure 50 Options dialog box—Configuration tab
.
3.
In the Storage Pool Protection Threshold area, set the capacity thresholds for each warning level.
For each warning level, define the threshold by percentage (%) of storage pool capacity remaining
on the left and total (GB) capacity remaining on the right.
4.
Click OK.
For information about configuring the free capacity alert threshold for a storage pool, see
“
Changing storage pool free capacity alert threshold
Storage pool capacity is evaluated against the configurable free capacity alert threshold. When the
free capacity of a storage pool drops below the threshold:
•
A notification is sent to any notification groups configured to receive this type of alert. For inform-
ation about configuring notification groups, see “
Configuring event log notifications
The notification is repeated every five minutes.
•
Creation of new virtual disks from the storage pool is blocked. This includes temporary virtual
disks. Therefore, PiT creation is also blocked.
•
Virtual disks from the storage pool are expanded by chunks that are limited to 1 GB, and not ac-
cording to the normal algorithm which uses 5% expansion.
HP StorageWorks SAN Virtualization Services Platform Manager user guide
239