Updating firmware – HP MSA 2040 SAN Storage User Manual
Page 41
Updating firmware
41
Updating firmware
After installing the hardware and powering on the storage system components for the first time, verify that
the controller modules, expansion modules, and disk drives are using the current firmware release. Using
the SMU, right-click the system in the Configuration View panel, and select Tools
Update > Firmware. The
Update Firmware panel displays the currently installed firmware versions, and enables you to update them.
Optionally, you can update firmware using FTP (File Transfer Protocol) as described in the MSA 2040 SMU
Reference Guide.
IMPORTANT:
See the “About firmware update” and “Updating firmware” topics within the MSA 2040
SMU Reference Guide before performing a firmware update.
NOTE:
To locate and download the latest software and firmware updates for your product, go to
http://www.hp.com/support
.