HP StorageWorks XP Remote Web Console Software - Manual (Page 12)

Table 1 Storage arrays that can be connected as external arrays (continued)
Notes Storage array
HP 200 Storage Virtualization System •
In XP External Storage panes, the array is an “SVS200”.
•
Alternate paths are in Multi mode.
HP 3000/5000 Enterprise Virtual Array (Active/Standby
and Active/Active controllers) or HP 4000/6000/8000
Enterprise Virtual Array (Active/Active controllers) •
In this user guide, the arrays appear as “EVA array”.
• In XP External Storage panes, the arrays appear as
“EVA”.
•
Alternate paths are in Single mode (meaning that
dynamic load balancing across multiple active paths is
not enabled).
HP MSA1000/1500 (Active/Standby) • In this user guide, the arrays appear as “MSA array”.
•
In XP External Storage panes, the arrays appear as
“MSA”.
•
Alternate paths are in Single mode.
TagmaStore™ Universal Storage Platform subsystem •
In this user guide, the array is a “TagmaStore™ USP
subsystem”.
• In XP External Storage panes, the array is a “USP”.
•
Alternate paths are in Multi mode.
TagmaStore™ Network Storage Controller subsystem • In this user guide, the array is a “TagmaStore™ NSC
subsystem”.
•
In XP External Storage panes, the array is an “NSC”.
• Alternate paths are in Multi mode.
TagmaStore™ Adaptable Modular Storage subsystem •
In this user guide, the array is a “TagmaStore™ AMS
subsystem”.
• In XP External Storage panes, the array is an “AMS”.
•
Alternate paths are in Single mode.
TagmaStore™ Workgroup Modular Storage subsystem • In this user guide, the array is a “TagmaStore™ WMS
subsystem”.
•
In XP External Storage panes, the array is an “NSC”.
• Alternate paths are in Single mode.
Lightning 9900V series subsystem •
“Lightning 99xxV series subsystem” indicates the
Lightning 9970V and Lightning 9980V.
• In this user guide, the arrays appear as “Lightning
9900V subsystem”.
•
In XP External Storage panes, the arrays appear as
“9970V” and “9980V”, respectively.
• Alternate paths are in Multi mode.
Thunder 9500V series subsystem •
“Thunder 95xxV series subsystem” indicates the Thunder
9530V, Thunder 9570V, and Thunder 9580V.
•
In this user guide, the arrays appear as “Thunder 9500V
subsystem”.
•
In XP External Storage panes, the arrays appear as
“9500V”.
•
Alternate paths are in Single mode.
Lightning 9900C series subsystem • “Lightning 99xxC series subsystem” indicates the
Lightning 9910 and Lightning 9960.
12 Preparing for XP External Storage operations