Serial-type fax setup, Configure the device (windows), Direct connection – HP Officejet J6480 All-in-One Printer User Manual

Page 110: Network connection

Advertising
background image

You must be available to respond in person to incoming fax calls, or the device cannot
receive faxes.

Serial-type fax setup

For information on setting up the device for faxing using a serial-type phone system,
see the Fax Configuration Web site for your country/region.

Austria

www.hp.com/at/faxconfig

Germany

www.hp.com/de/faxconfig

Switzerland (French)

www.hp.com/ch/fr/faxconfig

Switzerland (German)

www.hp.com/ch/de/faxconfig

United Kingdom

www.hp.com/uk/faxconfig

Finland

www.hp.fi/faxconfig

Denmark

www.hp.dk/faxconfig

Sweden

www.hp.se/faxconfig

Norway

www.hp.no/faxconfig

Netherlands

www.hp.nl/faxconfig

Belgium (Dutch)

www.hp.be/nl/faxconfig

Belguim (French)

www.hp.be/fr/faxconfig

Portugal

www.hp.pt/faxconfig

Spain

www.hp.es/faxconfig

France

www.hp.com/fr/faxconfig

Ireland

www.hp.com/ie/faxconfig

Italy

www.hp.com/it/faxconfig

Configure the device (Windows)

NOTE: Microsoft Internet Explorer 6.0 or higher must be installed on the
computer system to run the installation program.
In addition, you must have administrator privileges to install a printer driver on
Windows 2000, Windows XP, or Windows Vista.

When setting up the device, HP recommends that you connect it after you install the
software because the installation program is designed to provide you with the easiest
setup experience. However, if you have connected the cable first, see

Connect the

device before installing the software

.

This section contains the following topics:

Direct connection

Network connection

Chapter 8

106

Configure and manage

Advertising