Printer does not accept print cartridge, Printer takes a long time to print, Check the print cartridge – HP Deskjet 460cb Mobile Printer User Manual

Page 80: Clean the print cartridge, Check the system configuration, Check the print settings, Check for radio interference, Check the wireless connection

Advertising
background image

Chapter 5 - Maintaining and troubleshooting

80

Printer does not accept print cartridge

Check the print cartridge

Remove the print cartridge and make sure the protective tape has been removed completely from the print
cartridge. See

Cleaning the print cartridges

.

Clean the print cartridge

Complete the print cartridge cleaning procedure. See

Cleaning the print cartridges

.

Turn off the printer after removing the print cartridge

After removing the print cartridge, turn off the printer, and then turn on the printer without the print
cartridge installed. After the printer has restarted, reinsert the print cartridge.

Printer takes a long time to print

Check the system configuration

Make sure the computer meets the minimum system requirements for the printer. See

Printer specifications

.

Check the print settings

The printer prints slower when Best or Maximum dpi is selected as the print quality. To increase the print
speed, select different print settings in the printer driver. See

Changing print settings

.

Check for radio interference

If the printer is connected using wireless communication and is printing slowly, then the radio signal might
be weak. See

Problems setting up 802.11 or Bluetooth wireless communication

.

Check the wireless connection

Printing larger files using a Bluetooth wireless connection can sometimes cause the print job to fail. Try
printing a smaller file.

After switching from one 802.11 wireless profile to another, the first print job takes 10 seconds or so
before it starts to print.

See also

Problems setting up 802.11 or Bluetooth wireless communication

.

Advertising