HP Deskjet 460cb Mobile Printer - Manual (Page 82)

Chapter 5 - Maintaining and troubleshooting 82
Check the DPOF settings
If printing a DPOF file from a memory card, make sure the DPOF file was set up correctly in the device that
created it. Please see the documentation that came with the device. Always load the media for portrait
printing.
Check the borderless print settings
If printing using a PictBridge device, make sure the media settings in the device are correct or are
defaulting to the current printer settings.
Check the wireless connection
• Printing larger files using a Bluetooth wireless connection can sometimes cause the print job to fail. Try
printing a smaller file.
• See also Problems setting up 802.11 or Bluetooth wireless communication .
Check the mobile phone font
Boxes might appear when trying to print Asian fonts from a mobile phone on printers purchased outside
Asia. Asian fonts for Bluetooth mobile phone printing are supported by models purchased in Asia.
Placement of the text or graphics is wrong
Check the page-orientation setting
The page orientation selected might not be correct for the document you are printing. Make sure the
media size and page orientation selected in the software program match the settings in the printer driver.
See
Changing print settings
Check the paper size
• Make sure the paper size selected in the printer driver matches the paper size loaded in the printer.
• The size of the document you are printing might be larger than the media in the tray, so that content
outside the printable area is cut off.
If the layout of the document you are trying to print will fit on a media size supported by the printer,
then load the correct media size. Make sure to select the correct page orientation.
Alternatively, in Windows you can open the printer driver and select Scale to fit to scale the document
to fit the media size currently selected. See
Changing print settings .
• Print a configuration page to check printer media settings for direct printing. This information will verify
that you are loading the correct media size and type before printing.
If you have the Toolbox (Windows), HP Printer Utility (Mac OS), or Toolbox software for PDAs
(Pocket PC and Palm OS) installed, see
Printing device information pages from the software .
If you do not have one of these utilities installed, see Printing device information pages from the control
panel .