Airlink PinPoint EDGE/GPRS - Manual (Page 77)

PinPoint EDGE/GPRS - User Guide, version 2.32 71
AT Commands: Information and Status
+RCIQ
Current Cell Info
Information Displayed in Wireless Ace without AT Commands Listed
• Bytes and Packets Received and Sent
Network traffic for the applicable port.
• Number of System Resets
Counter of the number of system resets over the life of the modem or since the configuration
was reset.
• Bad Password Count
Counter of the number of bad password attempts.
• IP Reject Count or Log
Rejected IP Data.
• Versions of ALEOS, internal hardware, boot, and MSCI
Versions of internally configured hardware and software.
• GPS information
Number of satellites, GPS Fix (0 = No Fix, 1 = GPS Fix, 2 = WAAS), latitude, and longitude.
GPS Status and Map Link
In Wireless Ace, next to the displayed information of the Latitude and Longitude, there is a link to
an external map which will visually place the co-ordinates. When you click the map link, it will
open your default web browser with the map location highlighted.
FIGURE 3. Wireless Ace: Map Link