GE JV536HSS - Manual (Page 9)

PART QUANTITY
Metal Grease Filters 2
Mounting Screws 4
 ([KDXVW$GDSWRU'DPSHU 
(for 3 1 ø 4
”[” rect. venting)
 ([KDXVW$GDSWRU6FUHZV 
 ([KDXVW$GDSWRU

 IRUµURXQGYHQWLQJ
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
'$0$*(³6+,30(17,167$//$7,21
PARTS INCLUDED
MOUNTING SPACE
127(6
• This range hood is for installation over ranges up to 36”
wide.
• If you are going to vent your range hood to the outside,
VHHWKH´'XFWLQJ5HTXLUHPHQWVµVHFWLRQIRUH[KDXVWGXFW
preparation.
66” or
more from
the floor to
the top of
the hood
30” or 36”
30”
min.
Bottom edge
of cabinet
needs
to be 30” or
more from
the cooking
surface
Flat blade and Phillips
screwdrivers
Pencil
Metal snips
(in some
applications)
Electric drill Saw (saber or
keyhole)
Duct tape
Pliers
Level Caulking
Tape measure
 'DPSHUIRU” Round
 ([KDXVW$GDSWRU 2EWDLQ/RFDOO\
PARTS YOU MAY NEED
&KDUFRDO)LOWHUV³-96HULHVRQO\LIUHFLUFXODWLQJ
For 30”KRRGPRGHOVRUGHU.LWQR:%;
For 36”KRRGPRGHOVRUGHU.LWQR:%;
OPTIONAL ACCESSORIES
These kits can be ordered from your GE supplier.
 &RUG.LW³)RUERWK” and 36” models,
order Kit no. JXHC1.
TOOLS YOU WILL NEED
1/4” pivoting
KH[VRFNHW
Flashlight
Wire stripper
1/4” Nutdriver
Installation Instructions
9