GE AJCQ08ACF - Manual (Page 13)

*(.,7180%(56
Installation Instructions
USE GE
 .,7180%(5  )25  '(6&5,37,21
RAB46A ,46, Use these kits for all GE Standard wall case for “J” model chassis. RAG13 stamped
47A, 47, 48A, models and other brands aluminum exterior grille included. Remove the existing case
48B & 48 not listed and replace.
RAK65A1 All GE Models Kit for window installation.
RAK690 RAB36, 37, 38, 46, 47 or 48 If you attach a custom architectural outdoor grille, use this kit
(J-Chassis) to ensure proper airflow.
RAG13 RAB36, 37, 38, 46, 47 or 48 Standard aluminum exterior grille (included with RAB46, 47, 48,
(J-Chassis) RAB46A, 47A, 48A, and 48B wall cases).
RAG14E RAB36, 37, 38, 46, 47 or 48 Architectural louvered exterior grille.
(J-Chassis)
Read these instructions completely and carefully.
722/6<280$<1(('
Adjustable Wrench
Level
Phillips-head
screwdriver
Hand or Saber Saw
Drill
Pencil
Ruler or Tape Measure Scissors or knife
13
Power cord may include a current interrupter device.
A test and reset button is provided on the plug case.
The device should be tested on a periodic basis by first
pressing the TEST button and then the RESET button.
If the TEST button does not trip or if the RESET button
will not stay engaged, discontinue use of the air
conditioner and contact a qualified service technician.
$'$&RPSOLDQFH
Operation by
Remote Control
A Remote Control device is shipped with GE Built-In Air Conditioners. When operated by Re-
mote Control GE Built-in ACs meet all federal ADA compliance requirements.
Operation at
&RQWURO3DQHO GE Built In Air Conditioners intended to be operated at the control panel meet federal ADA
compliance requirements when installed so that the controls are more than 15” from ground
and less than 48” from the ground.
Operation by
Thermostat
GE Air Conditioners intended to be operated via a wall thermostat meet federal ADA compli-
ance requirements when used in conjunction with an ADA compliant wall thermostat mounted
more than 15” and less than 48” from the ground.