GE PVB94STSS - Manual (Page 7)

7
Before You Call For Service…
Save time
and money!
Review the
troubleshooting
tips on this
page first and
you may not
need to call
for service.
PROBLEM POSSIBLE CAUSE
FAN DOES • The vent is not fully extended. Press the ON/OFF pad.
NOT WORK
VENT DOES
• The vent is not plugged into an outlet. Plug the vent into a 120V
NOT WORK power outlet.
• The raise/lower pad did not engage the lift motor. Hold down the
pad for a couple of seconds to activate the motor.
 ‡7KHFLUFXLWEUHDNHUPD\KDYHWULSSHG&KHFNWKHFLUFXLWEUHDNHU³
reset if necessary.
• Sufficient makeup (replacement) air is required for exhausting
appliances to operate to rating. Check with local building codes, which
may require or strongly advise the use of makeup air. Visit
GEAppliances.com for available makeup air solutions.
Downdraft Vent System