Installation instructions, Caution, Precaución – GE PSB9120DFBB User Manual

Page 16

Advertising
background image

16

Installation Instructions

6 INSTALL MOUNTING SCREWS

‡ Slide the oven the remaining way into the opening

so that the side flanges and control panel are

against the cabinet frame. Make sure that the oven

is centered in the opening.

‡ Open the door, place a turntable tray in the oven

and make sure that the tray in the unit is level.

‡ Drill pilot holes through the side flanges.
‡ Drive the color-matched screws into the side

flanges. It is recommended that the screws

be hand tightened.

If installing oven with an accessory storage

drawer:
‡
Open the drawer.
‡ Drill pilot holes through the side flanges.
‡ Drive color-matched screws into the side flanges.

It is recommended that the screws be hand

tightened.

NOTE: If installing the Profile Advantium 120V Oven

with an accessory storage drawer, you must use

the Under-the-Counter (UTC) mounting bracket for

the drawer.
If installing the Monogram Advantium integrated

model

ZSC1201

above 36s, the UTC mounting bracket

for the accessory storage drawer must be used.

7 FINALIZE INSTALLATION

‡ Turn power on at the source. The interior light

should come on when the door is opened.

‡ Refer to Owner’s Manual for operating instructions.

4 INSTALL BOTTOM TRIM

CAUTION:

If installing the Advantium

120V Oven below 36s, you must use the plastic

bottom trim due to burn risk to children. The plastic

trim acts as insulation and will help prevent burns

to children from hot surfaces.

PRECAUCIÓN:

Si va a instalar el horno

Advantium de 120V debajo de 36”, usted debe utilizar

el reborde inferior plástico debido al riesgo de

quemaduras para los niños. El reborde plástico

actúa como aislante y evitará que los niños sufran
quemaduras provocadas por las superficies calientes.

NOTE: If installing the Advantium 120V Oven

with an accessory storage drawer, the bottom trim

is not required. Proceed to Step 5.
‡ Installation Below 36s, align trim tabs on the plastic

trim to slots in the bottom of the oven.

‡ Installation Above 36s, align trim tabs on the plastic

or metal trim to slots in the bottom of the oven.

‡ Secure the bottom trim to the bottom of the oven

using 3 screws provided.

5 INSTALL BOTTOM TRIM WITH

ACCESSORY DRAWER

If installing with an accessory drawer, see

installation instructions on page 17 or instructions

that come with the accessory drawer.

Metal

Trim

Plastic

Trim OR

Plastic

Trim

Advertising
This manual is related to the following products: