Answering system operation, At the base, Audible indicators – AT&T 9353 User Manual
Page 14: Set the clock, About mailboxes, About announcements
![background image](/manuals/39985/14/background.png)
10
ANSWERING SYSTEM OPERATION
AT THE BASE
Audible Indicators
This system gives you voice prompts for feature operations and voice
confirmations when you press a button or complete an operation.
Set the Clock
1
With answering system on, press
U until the system
announces,“Change clock.”
2
Press
S until the system announces the correct day, then
press
t.
3
Press
S until the system announces the correct hour, then
press
t.
4
Press
S until the system announces the correct minutes, then
press
t. The system announces the current clock setting.
5
Press an MBOX/STOP button to exit programming.
About Mailboxes
This answering system has three voice mailboxes. Callers using a touch
tone phone can select the mailbox in which their messages will be recorded
by pressing
* 1, * 2, or * 3 while the system plays the outgoing
announcement. All other messages will be recorded in Mailbox 1.
About Announcements
•
You can record up to two different announcements — one for normal
answering and one for when you’ve set the system to play the
announcement only.
•
Use normal answering when you want the system to record callers’
messages. Use Announce Only when you want to give information to
callers without accepting messages.
•
If you choose not to record an announcement, the system answers with
a pre-recorded announcement.
•
The normal answering pre-recorded announcement says: “Hello. Please
leave a message after the tone.”
The Announce Only pre-recorded
announcement says: “We’re sorry, messages to this number cannot
be accepted.”
•
By setting Announce Only to On or Off, you decide which
announcement your callers will hear when the system answers a call
(the system comes set for normal answering, with Announce Only
turned off). See “Change Announce Only” on page 12 to change your
announcement selection.
9353_book_1ATT 6/7/01 1:56 PM Page 10