GE JP336DDBB - Manual

For answers to your Monogram ® or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center
® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Important: Requires a 5" free area between the
bottom of the cooktop to any combustible material,
i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation
instructions. Requires a 15" minimum from cooktop to
adjacent overhead cabinets. Units are furnished with
a 48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use
over select GE 27" and GE 30" Single Wall Ovens and
Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed
with product for current dimensional data. If installed
with a GE Telescopic Downdraft System, consult both
the cooktop and downdraft installation instructions
packed with product before installing. Cooktop gas/
electric supply may need to be re-routed to install
downdraft. The countertop cutout requires 23-1/2”
minimum flat countertop surface and 25” minimum
total countertop depth. In addition, other clearances
to front edge of the countertop must be considered.
Consult cabinet and countertop manufacturer’s specs
for flush mount installation prior to install.
Before
installing, consult installation instructions packed
with product for current dimensional data.
Filler Trim Kit: When replacing an old GE 30" cooktop
(with larger opening) use the following one-piece trim
kit to fill in the over-size hole. Available at additional
cost. JXTR32B (Black) or JXTR32W (White)
KW Rating
240V 7.4
208V 5.6
Breaker Size
240V 40 Amps †
208V 30 Amps †
JP336DD
GE 30" Built-In Clean Design Electric Cooktop
321372 Specification Created 10/12
Dimensions and Installation Information (in inches)
† Note: Check local codes for
required breaker size
* ADA qualified based
on Uniform Federal
Accessibility Standards
*